Energy intelligence for small manufacturers

See every kilowatt. Stop paying for the ones you waste.

Clip-on sensors that cost less than a service call, plus AI that learns how your plant normally runs. It flags wasted energy, machines drifting toward failure, and utility billing mistakes, automatically. No energy consultant needed.

Request a pilot Watch how it works
  • No rewiring or downtime
  • Works with any machine brand
  • First insights in week one
0–0% typical energy savings in pilots
<0 hrs setup, done in under one day
<0 s from anomaly to real-time alert
$0 upfront hardware cost for pilot sites

Figures are placeholders based on early pilot targets.

The problem

Your power bill hides three kinds of waste.

You get one number at the end of the month. It doesn't tell you which machine, which shift, or which line item is costing you money.

Idle machines running overnight

Compressors, chillers, and ovens left on after the last shift keep drawing 30 to 50% of full load. Nobody sees it because nobody is there.

Often $1,000 to $4,000 a month in a single plant

Motors drawing more before they fail

A worn bearing or clogged filter makes a motor pull more current for weeks before it breaks. That creep is the earliest warning you'll get, and it's invisible without a sensor.

One unplanned stop can cost more than a year of monitoring

Billing mistakes nobody catches

Wrong rate schedules, estimated meter reads, and demand charges that don't match what you actually used. Utilities rarely volunteer the refund.

A wrong tariff can overcharge you every month for years

How it works

From clip-on sensor to savings in four steps.

No IT project. No rewiring. An electrician can install a typical plant in an afternoon.

  1. 01

    Install sensors

    Non-invasive current clamps snap onto your panel and key machines. No shutdown, no rewiring, about $40 per point.

  2. 02

    Data streams to the cloud

    A cellular gateway sends readings every second. It stays off your plant network, so there's nothing for IT to approve.

  3. 03

    AI learns your normal

    Over the first two weeks, models learn each machine's normal load by shift, day, and season, so alerts mean something.

  4. 04

    Get alerts and a weekly summary

    Real-time alerts by text or email when something's off, plus a plain-language weekly report: what you wasted, where, and what to fix first.

Features

Everything you need to cut the bill. Nothing you don't.

Real-time monitoring

Second-by-second kW, kWh, and cost for every metered machine, line, and panel. See exactly what's running right now.

Anomaly alerts

Get a text when a machine runs off-schedule or draws more than its learned normal. Tuned to avoid alert fatigue.

Machine health signals

Current creep, phase imbalance, and startup spikes turned into a simple health score, weeks before a breakdown.

Weekly AI summary email

A short, plain-English report every Monday: dollars wasted, top three fixes, and what changed since last week.

Bill verification

Upload your utility bill and we check it against metered usage and your tariff. Mismatches come with the evidence to dispute them.

Multi-site view

Compare plants side by side on cost per unit produced. Find which site runs best and copy what it does.

Built on AWS

Industrial-grade infrastructure behind a simple dashboard.

Every reading flows through managed AWS services, so the platform scales from one plant to hundreds without us rebuilding anything.

Scalable ingestion

IoT Core and Kinesis absorb millions of readings per hour and scale automatically as you add sensors or sites. No servers for you, or us, to babysit.

Models that keep learning

SageMaker retrains each machine's baseline on fresh Timestream data every week, so seasonal shifts and new equipment don't trigger false alarms.

Secure by default

Per-device certificates, encryption in transit and at rest, and data isolated per customer in a U.S. AWS region.

Sustainability

Lower bills and lower emissions are the same project.

Every kilowatt-hour you stop wasting is one your utility doesn't have to generate. You don't need a separate sustainability budget: the carbon reduction comes free with the savings.

  • Emissions tracked per machine, per site
  • Export-ready numbers for customer ESG questionnaires
  • Supports Scope 2 reporting

Estimate your savings

$1,000 to $1,000,000
Compressors, motors, ovens, chillers, presses
Estimated annual savings $24,000 – $36,000
Per month $2,000 – $3,000
CO₂ avoided / yr 70 – 105 t

Placeholder estimate. Assumes $0.13/kWh and 0.39 kg CO₂/kWh (U.S. grid average). Your pilot report will show real numbers.

Pilot program

10 factories. 90 days. You keep the savings.

We're selecting 10 small and mid-size manufacturers for our founding pilot. We supply and install the sensors, run the platform, and deliver a savings report at day 90.

  • Free hardware and install for up to 24 monitoring points
  • Weekly check-ins with our engineering team
  • Bill audit of your last 12 months of utility invoices
  • No obligation. If we don't find savings, you owe nothing
6 of 10 spots remaining

Apply for the pilot

Takes 60 seconds. We reply within two business days.

We'll only use your details to contact you about the pilot.

FAQ

Straight answers.

Will the sensors work with my equipment?

Almost certainly. Our current clamps measure the electricity going into a machine, so brand, age, and controls don't matter. They work on single- and three-phase loads from 5 A to 800 A, including 20-year-old compressors with no network connection. If you already have smart meters or a PLC, we can pull from those too.

How long does installation take? Do we need to shut down?

Most plants are installed in under one day with zero downtime. A licensed electrician clamps sensors around existing wires inside your panels, so nothing is disconnected. The gateway uses its own cellular connection and plugs into a standard outlet.

Is our data secure?

Yes. Each device authenticates with its own certificate, data is encrypted in transit and at rest, and your data is isolated from other customers on AWS in the U.S. The gateway never touches your plant network. We only collect electrical measurements: no cameras, no production recipes. You own your data and can export or delete it at any time.

How much does it cost after the pilot?

Pricing is a flat monthly subscription per monitoring point, with hardware included. No large upfront purchase. We size it so savings cover the subscription several times over; if the pilot doesn't show that, we'll tell you not to buy. Exact pricing is shared during your fit call.

Do I need someone on staff to analyze the data?

No. That's the point. The weekly summary tells you in plain language what's wasting money and what to do about it. Most customers spend about 10 minutes a week with it.

Your meter is already running. Find out where it's going.

Request a pilot